The MY-14 wing has been painted

Suomeksi

The MY-14 wing was transported from Vantaa and the Tuesday Club’s Myrsky group hands to Tikkakoski and Finnish Air Force Museum's restoration group for necessary modifications, painting and joining to the fuselage in September 2024.

The modifications on the wing took the winter period 2024-2025 and the spring 2025. When I visited the Air Force Museum on 12.6.2025 the transportation and painting trestle was being assembled to the wing and after a couple of days on 17.6.2034 the wing was transported to the premises of Haklog Ky for painting.

The painting was mainly done using a high-pressure spray gun. It yields thicker layers of paint, although the quality of the surface is - depending on the type of paint - worse than with a side air brush, which was used to paint the swastika, mid-wing and black areas. The incentive to use the high-pressure spray gun was the fairly large area of the wing where the alkyd paint in use was known to give a smooth surface.

Because of the modifications the wing, which had been primed at Vantaa, had to be puttied and sanded, so the wing was given a once over with the Future-3-primer to the shade of RAL 7005.

After the primer the wing undersides were painted light blue with Teknosynt Combi 50 paint, with a shade that was called DN-blue during the war, and is now called RAL Design 220 60 10.

After the underside, next in line was the upper side green part, painted twice. Between the layers of paint, the surface was sanded. The paint was still the Teknosynt Combi in the shade of Teknos TM-11263/20.

Following the upper wing green area, the black camouflage of the plywood surfaces was painted. According to the instructions of the State Aircraft Factory, only one layer was painted. The borders were painted with low pressure spray gun, in order to make the borders sharp. After that the central parts were painted over.

Next in turn was the painting of the Eastern Front decals to the wingtips for a length of about I/6 or 183 cm. The painting was done with fully glossy Futura 90 using the Teknos TM 11297/20 shade.

For the painting of the national emblem, a circle 1 metre in diameter, was cut from a thick cardboard and a template for the swastika. The emblems were positioned with the help of the templates and using a laser and marked with a pencil. The circles were taped, and the rest of the wing was covered with plastic. There wasn’t enough of anti-glare paint for the emblems, so more had to be mixed using the corresponding paint for the fuselage as reference. The circles were painted with high pressure air gun.

The swastika in the circles was painted with the same method using fully glossy Teknosynt 90-paint. The shade was Teknos TM 11264/20.

The last parts to be painted were the parts in the mid-wing, that are covered by the cockpit and the wing root fairings, with Temalac FD 80-paint in the shade of RAL 7005.

Notice and guide markings and the markings for the service hatches are yet to be painted. Modifications for the aileron push rods are still unfinished and there are still holes in their coverings. But because the national emblems are hard to get identical, if their parts are painted separately, the part of the national emblems was painted now on the ailerons. For their part the yellow and black areas will be painted together with the wing root fairings, elevators and the rest of the missing pieces of covering.

After the painting, the wing was transported by the Defence Forces from the premises of Haklog Ky to the Finnish Air Force Museum on Wednesday 2.7.2025. The wing, with its transportation and painting trestle, was placed in the main display, next to the fuselage of MY-14. There the aircraft will be admired by the visitors and wait for the end of the summer holiday and the beginning of the autumn operations.

Photos: Finnish Air Force Museum

Translation to English: Matti Liuskallio