Constructing the Demo-Myrsky

Suomeksi

When the VL Myrsky ll (MY-14) restoration project had come to an end, at the beginning of autumn, as far as the Tuesday Club Members freed from the restoration were concerned, they chose not to stay put twiddling their thumbs. So the idea of building a Demo-Myrsky was dug out.

Our purpose is to build an entity from the Myrsky test wing, currently on show at the Finnish Aviation Museum exhibition, and the Myrsky MY-5 fuselage frame, to demonstrate coherently the structure and equipment of the mixed construction Myrsky-fighter, designed and built by State Aircraft Factory. The inner construction and technique of the MY-14 fighter that we had restored, are hidden inside the plywood covered fuselage and wings. In the Demo-Myrsky they would be exposed.

The test wing, on display in the Finnish Aviation Museum, was built at the beginning of the Myrsky restoration project. By building the test wing it was found out how the Myrsky wing, particularly the root with all its equipment, was constructed at its time. Our ambiguity was mainly caused by the fact that the blueprints at our disposal were partly contradictory. The main reason for the controversy was the ongoing development during the serial production, causing changes to structural solutions. By building the test wing we managed to get our ambiguity to dissolve.

After the test wing was finished, the building of the actual Myrsky wing began. Already at that stage the idea was born to utilize the test wing later to demonstrate the wing structure and the equipment fitted in it. Therefore the test wing was covered with transparent plexiglass instead of plywood and was placed on display in number l Hall in the Finnish Aviation Museum.

After the Myrsky wing was completed, we utilized the MY-5 fuselage frame in testing how to join the wing to the fuselage, including the assembly of the wing root fairings. This led to the idea of utilizing the MY-5 fuselage frame, together with the test wing, for demonstrating the mixed structure of the Myrsky by joining the test wing and the uncovered fuselage frame.

In this task the rear part of the MY-5 fuselage frame is under work, because the rear section of the fuselage frame needs repairing and refurbishing. The rear fuselage will also get a rudder and elevators of wooden construction.

The rear fuselage has been repaired by welding and the tail wheel mounting, made of steel tubes according to blueprints, has been fastened to it. The Myrsky wooden vertical stabilizer has been under construction in a specially made jig. The vertical stabilizer frame is about to be ready. The left and right-hand horizontal stabilizer ribs and the blanks of the wing spars are ready to be assembled. The vertical and horizontal stabilizers will remain uncovered, at least on one side.

How far the Demo-Myrsky MY-5 fuselage frame will be completed, is still an open question. It could be advanced, even if it were on display for the public. Well, a place to show the Demo-Myrsky won’t be available in the near future, at least not in the Finnish Aviation Museum, which is preparing to move to new premises. That’s why the construction of the Demo-Myrsky at the Finnish Aviation Museum will come to an end by the end of this year, even though it won’t be ready. From the beginning of 2025, the restoration workshop at the Finnish Aviation Museum will be reserved for servicing the museum artefacts before moving them to the new Aviation Museum in a couple of years. The Aviation Museum Society is presently looking for temporary premises where the restoration work could be continued next year.

Photos by Lassi Karivalo.

Translation to English by Matti Liuskallio.